How do I... disable this (Video in here)

Have you come up with a good Moho trick? Need help solving an animation problem? Come on in.

Moderators: Víctor Paredes, Belgarath, slowtiger

Post Reply
Meliodas
Posts: 8
Joined: Fri May 12, 2017 9:37 pm

How do I... disable this (Video in here)

Post by Meliodas »

Hey,
I have a problem with this, I don't know how to describe, so here is the link: https://www.youtube.com/watch?v=0Kk3MmO ... e=youtu.be
The head should sit on the body but it is moving around randomly, not with the body.

I hope someone know what this is, thanks a lot!
User avatar
hayasidist
Posts: 3492
Joined: Wed Feb 16, 2011 8:12 pm
Location: Kent, England

Re: How do I... disable this (Video in here)

Post by hayasidist »

Looks like parallax motion - I guess you're moving the group layer that holds head and body layers? If so... First thing to try: check the z coordinates of the head / body layers. Are they the same or different? If they're different - make them the same. If that doesn't fix it just say and we'll have another go.
Meliodas
Posts: 8
Joined: Fri May 12, 2017 9:37 pm

Re: How do I... disable this (Video in here)

Post by Meliodas »

Do you mean these coordinates? They all are the same, 0, 0 and 3.7321.
Here is another video that shows the problem. https://www.youtube.com/watch?v=j-e6A7w ... e=youtu.be
User avatar
hayasidist
Posts: 3492
Joined: Wed Feb 16, 2011 8:12 pm
Location: Kent, England

Re: How do I... disable this (Video in here)

Post by hayasidist »

that sounds like the camera not the layer coords... can you double check the layer position. If not, if you'd like to upload the file we can take a look at it.
Meliodas
Posts: 8
Joined: Fri May 12, 2017 9:37 pm

Re: How do I... disable this (Video in here)

Post by Meliodas »

Oh, I used the camera tool, sorry. I just made Z the same and it works now, thank you so much for you help!
Post Reply