Change the layer-order during the animation
Moderators: Víctor Paredes, Belgarath, slowtiger
Change the layer-order during the animation
Hello everybody!
I'am really new in useing MoHo, so iam still on the Demo-Version, but i'm going to buy it overmorrow (MoHo Debut 12).
I've been looking for a long time in the manual but i still not find a funktion that allow's me to change what's behind and what's in front of something.
So in my case i have a stickman that goes thru a door. At first he is behind the wall and when he walks thru he is of course in front of the wall.
(I've also tried to solve this with the "Sequenzer-Timeline", i don't know if it is eighter a bug in the demo or i do something wrong, but when i set the start-point of a layer the programm completely ignores that and the layer is shown from the beginn to the end. In addidion i haven't find the funktion "Set Layer End Time" logicaly it must be somewhere around the funktion "(Menü Strip)/Animation/Set Layer Start Time", but there it isen't. )
Big thanks in advance
I'am really new in useing MoHo, so iam still on the Demo-Version, but i'm going to buy it overmorrow (MoHo Debut 12).
I've been looking for a long time in the manual but i still not find a funktion that allow's me to change what's behind and what's in front of something.
So in my case i have a stickman that goes thru a door. At first he is behind the wall and when he walks thru he is of course in front of the wall.
(I've also tried to solve this with the "Sequenzer-Timeline", i don't know if it is eighter a bug in the demo or i do something wrong, but when i set the start-point of a layer the programm completely ignores that and the layer is shown from the beginn to the end. In addidion i haven't find the funktion "Set Layer End Time" logicaly it must be somewhere around the funktion "(Menü Strip)/Animation/Set Layer Start Time", but there it isen't. )
Big thanks in advance
Re: Change the layer-order during the animation
2 possible solutions:
- You don't need to have the door in just one layer. Put the front wall into its own layer on top of your character.
- Animated layer order only works within group or bone layers. Put your stuff into one of those layers. You have to enable it first, in the tab "Depth sort".
- You don't need to have the door in just one layer. Put the front wall into its own layer on top of your character.
- Animated layer order only works within group or bone layers. Put your stuff into one of those layers. You have to enable it first, in the tab "Depth sort".
AS 9.5 MacPro Quadcore 3GHz 16GB OS 10.6.8 Quicktime 7.6.6
AS 11 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
Moho 13.5 iMac Quadcore 2,9GHz 16GB OS 10.15
Moho 14.1 Mac Mini Plus OS 13.5
AS 11 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
Moho 13.5 iMac Quadcore 2,9GHz 16GB OS 10.15
Moho 14.1 Mac Mini Plus OS 13.5
Re: Change the layer-order during the animation
Danke für deine Antwort!
Da ich sehe, dass du aus Deutschland kommst können wir ja deutsch schreiben
Den "Gruppen-Layer" gibt es in der "Debut-Version" leider nicht.
Aber ich muss mir erst den Sinn von Knochen genauer ansehen, da ich wie gesagt neu in der Verwendung von MoHo bin.
Hier ist noch ein Foto von meinem Problem im Sachzusammenhang:
Im Webdesign gibt es denn sogenannten "z-index" für Überlappungen.
So etwas ähnliches würde ich hier auch brauchen, sodass ich z.B. sagen kann Frame-49: Tür vor Strichmännchen aber Frame-50: Tür nach Strichmännchen.
Ich habe jedenfalls bis jetzt leider noch keine Möglichkeit gefunden die Z-Koordinate Frame-für-Frame zu verändern.
Da ich sehe, dass du aus Deutschland kommst können wir ja deutsch schreiben
Den "Gruppen-Layer" gibt es in der "Debut-Version" leider nicht.
Aber ich muss mir erst den Sinn von Knochen genauer ansehen, da ich wie gesagt neu in der Verwendung von MoHo bin.
Hier ist noch ein Foto von meinem Problem im Sachzusammenhang:
Im Webdesign gibt es denn sogenannten "z-index" für Überlappungen.
So etwas ähnliches würde ich hier auch brauchen, sodass ich z.B. sagen kann Frame-49: Tür vor Strichmännchen aber Frame-50: Tür nach Strichmännchen.
Ich habe jedenfalls bis jetzt leider noch keine Möglichkeit gefunden die Z-Koordinate Frame-für-Frame zu verändern.
Re: Change the layer-order during the animation
Z-Wert nützt dir nix, da die Layer-Ordnung entscheidend ist.
Nimm einen Bone-Layer, der ist gleichzeitig ein Group-Layer.
Nimm einen Bone-Layer, der ist gleichzeitig ein Group-Layer.
AS 9.5 MacPro Quadcore 3GHz 16GB OS 10.6.8 Quicktime 7.6.6
AS 11 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
Moho 13.5 iMac Quadcore 2,9GHz 16GB OS 10.15
Moho 14.1 Mac Mini Plus OS 13.5
AS 11 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
Moho 13.5 iMac Quadcore 2,9GHz 16GB OS 10.15
Moho 14.1 Mac Mini Plus OS 13.5
Re: Change the layer-order during the animation
Aber kann kann ja die Layer-Ordnung nicht während der Animation verändern.
Re: Change the layer-order during the animation
Doch. Hat denselben Depth-Sort-Reiter.
AS 9.5 MacPro Quadcore 3GHz 16GB OS 10.6.8 Quicktime 7.6.6
AS 11 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
Moho 13.5 iMac Quadcore 2,9GHz 16GB OS 10.15
Moho 14.1 Mac Mini Plus OS 13.5
AS 11 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
Moho 13.5 iMac Quadcore 2,9GHz 16GB OS 10.15
Moho 14.1 Mac Mini Plus OS 13.5
Re: Change the layer-order during the animation
Aber wie kann ich die Reihenfolge für einen gewissen Framebereich ändern?
Denn wenn ich im Ebenen-Editor (rechts unten) etwas verändere ist es im gesamten Projekt so.
Denn wenn ich im Ebenen-Editor (rechts unten) etwas verändere ist es im gesamten Projekt so.
Re: Change the layer-order during the animation
1. Zuerst im übergeordneten Group- oder Bone-Layer unter "Depth Sort" "Enable animated layer order" ankreuzen.
2. Dann die untergeordneten Layer neu anordnen, in der Layer-Palette. Die Keyframes dafür erscheinen im übergeordneten Layer.
2. Dann die untergeordneten Layer neu anordnen, in der Layer-Palette. Die Keyframes dafür erscheinen im übergeordneten Layer.
AS 9.5 MacPro Quadcore 3GHz 16GB OS 10.6.8 Quicktime 7.6.6
AS 11 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
Moho 13.5 iMac Quadcore 2,9GHz 16GB OS 10.15
Moho 14.1 Mac Mini Plus OS 13.5
AS 11 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
Moho 13.5 iMac Quadcore 2,9GHz 16GB OS 10.15
Moho 14.1 Mac Mini Plus OS 13.5
Re: Change the layer-order during the animation
Es hat funktioniert
Vielen Dank für deine Hilfe
Vielen Dank für deine Hilfe
Re: Change the layer-order during the animation
Bitteschön.
An manchen Stellen kommt es bei Moho sehr auf die genaue Abfolge von Schritten an. Steht alles im Manual, man muß sich aber erst dran gewöhnen.
An manchen Stellen kommt es bei Moho sehr auf die genaue Abfolge von Schritten an. Steht alles im Manual, man muß sich aber erst dran gewöhnen.
AS 9.5 MacPro Quadcore 3GHz 16GB OS 10.6.8 Quicktime 7.6.6
AS 11 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
Moho 13.5 iMac Quadcore 2,9GHz 16GB OS 10.15
Moho 14.1 Mac Mini Plus OS 13.5
AS 11 MacPro 12core 3GHz 32GB OS 10.11 Quicktime 10.7.3
Moho 13.5 iMac Quadcore 2,9GHz 16GB OS 10.15
Moho 14.1 Mac Mini Plus OS 13.5
Re: Change the layer-order during the animation
Hallo,
ich bringe das Thema nochmal nach vorne, denn ich habe gerade das Problem, dass die Sortierung nicht funktioniert.
Ich habe alle meine Ebenen unter einer Bone Gruppe sortiert. Bei der Bone Gruppe ist die Funktion 'Enable animated layer order' aktiviert.
Leider funktioniert die Umsortierung nicht (ich kann die Ebenen nicht auf eine andere Position schieben). Komischerweise wird aber trotzdem auf der Bone-Gruppe
eine neue 'Layer Ordering' Spur angelegt und dort werden auch die Änderungen als Keyframe angezeigt.
Wenn ich im gleichen Projekt eine neue Bone Gruppe mit mehreren Ebenen anlege und diese umsortiere, klappt es mit der Funktion. Es muss also irgendwas mit ersten Bone Gruppe nicht stimmen.
Gruß
ich bringe das Thema nochmal nach vorne, denn ich habe gerade das Problem, dass die Sortierung nicht funktioniert.
Ich habe alle meine Ebenen unter einer Bone Gruppe sortiert. Bei der Bone Gruppe ist die Funktion 'Enable animated layer order' aktiviert.
Leider funktioniert die Umsortierung nicht (ich kann die Ebenen nicht auf eine andere Position schieben). Komischerweise wird aber trotzdem auf der Bone-Gruppe
eine neue 'Layer Ordering' Spur angelegt und dort werden auch die Änderungen als Keyframe angezeigt.
Wenn ich im gleichen Projekt eine neue Bone Gruppe mit mehreren Ebenen anlege und diese umsortiere, klappt es mit der Funktion. Es muss also irgendwas mit ersten Bone Gruppe nicht stimmen.
Gruß